Every year from July to September is the peak season for exporting Christmas goods, and a large number of Christmas goods are sent to the United States, France, Germany, Italy, Australia, Singapore and other parts of the world.

carry outPre-shipment inspectionIt is one of the key factors in guaranteeing the smooth shipment of these Christmas supply orders. How can these export Christmas trees and decorative products be determined to meet quality standards?

I. Packaging marking inspection

(1) Outer case

Whether the dimensional specifications of the outer box are correct.

Whether the outer box markings are correct.

Logos are correct and labels are posted correctly.

Whether the closure of the outer box is H-shaped, with or without nails, and whether the net gross weight of the outer box is correct.

(2)gift box

Whether the size specification of the color box is correct.

Whether the color picture on the color box is consistent with the product, and whether there are any damages or folds.

Whether the instructions, barcode, etc. on the color box are in accordance with the order.

The labeling on the color box is correctly labeled.

Two,Exterior Inspection

(1)synthesis

The number of layers of branches and the number of branches and leaves are in accordance with the order.

Whether the specification and color of the leaves meet the requirements.

Whether the overall style meets the requirements.

Whether the tree's circumference and height at each level after the tree has been assembled meet the requirements of the order.

The tree should not be too crooked after it is set up.

(2)pedestals

The tree is propped up and then pressed underhand to see if the foot strength is sufficient.

If the tree foot is made of plastic, take the stump and see if the iron pipe will put the plastic through the bottom.

(3)limb

The length and thickness of the leaves are in accordance with the order.

Whether the color meets the requirements of the order.

Whether the length of each branch meets the requirements of the order.

Whether the number of branching branches is consistent with the order.

Are there wire outcroppings on the branches of the branch.

(4)Iron pipe, wire

Whether the diameter thickness and length of the iron pipe are in accordance with the requirements of the order.

Whether the diameter thickness and length of the wire are in accordance with the order.

Is the wire dense enough for the wire to be used in the branch tying process.

Whether the iron pipe is exposed during leaf tying.

Branches tied to the iron pipe for looseness or detachment.

Three,Assembly Inspection

Check the parts on the manual, if the manual describes the dimensions of the parts, the subsequent measurement of the dimensions of the parts is required.

Verify that the actual assembly matches the instruction manual directions.

Verify that the assembly process is easy.

Check whether it is easy to open the branch (it should be assembled with the assistance of the factory, check whether the actual assembly steps are in line with the instructions, whether the degree of difficulty is suitable for consumers, and if tools are required for the assembly process, whether they are attached with the product package, and if they are not attached, whether they are labeled on the instruction manual to indicate the tools required).

Four,Size and weight check

Whether the weight of the product conforms to the sample, order and product details.

Check the dimensions: tree circumference dimensions, the large width of the branch when it is fully open.

Use a tape measure to measure the height of the tree as ordered and labeled.

Is the total number of branches as ordered.

Are the leaves of the tree consistent in thickness.

Five,stability testing

Place the assembled Christmas tree on an 8 degree slope and rotate the entire tree to a position where it is easy to tip over and the product cannot be tipped over. If the product comes with decorations assemble all the decorations as required and test.

Six,Flame Retardant Test

Christmas trees and Christmas decorations generally have flame retardant requirements, that is, the materials that make up the product and in contact with the source of ignition, when the source of ignition is removed, the fire on the product should be extinguished immediately.

Test method: take the corresponding parts of the product under test, light it with a lighter, quickly remove the lighter source of fire, and observe whether the fire on the product goes out immediately.

Seven,Strength check

Christmas tree branches are required to withstand a 2KG pulling force over 10S.

Christmas tree branches and leaves are required to withstand a 0.5KG tensile force over 10S.

Lanyards for decorative items are required to withstand 2 times the weight of the product.

Decorations are required to withstand a 0.5KG tensile force over 10S.

Eight,over-needle test

Plush and textile decorations can not contain broken needles and metal objects, in order to prevent the use of personal safety impact, the use of needle detectors or metal detectors, the effectiveness of the use of standard modules need to be tested before use.

During the peak export season from July to September, the need for enterprises to control product quality is particularly urgent. As a professionalThird party inspection companiesWe will strictly adhere to the above full-process inspection standards, and with a neutral, impartial and objective standpoint, we will carry out an all-round detailed inspection of each batch of Christmas products, from packaging to safety performance. Our core objective is to help exporters effectively avoid quality risks, ensure that products fully comply with order requirements and international market standards, and also provide reliable quality assurance for overseas buyers. If you haveinspection of goodsDemand, welcome to visitInspector OnlineThe